Infocus IN112aT ユーザーズマニュアル

9

Displaying an image

Press the Power button.
The Power LED lights blue,

 

and the fans start to run. When the lamp comes on, 

the start up screen displays. It can take up to a minute for the image to achieve full 

brightness. Note: When the feature, AC Power On, is enabled, the projector 

automatically turns on when power is connected. This allows control of ceiling 

mounted projectors with a wall power switch.

No start up screen? Get help on page 13.

Turn on your computer or video device.

The image should appear on the projection screen. If it doesn’t, press the Source 

button on the projector’s keypad or remote.

If you are using a VGA cable to connect your computer to the projector:

If using a laptop, make sure its external video port is active.

Many laptops do not automatically turn on their external video port when a 

projector is connected. Usually a key combination like FN + F8 or CRT/LCD key 

turns the external display on and off. Locate a function key labeled CRT/LCD or a 

function key with a monitor symbol. Press FN and the labeled function key 

simultaneously. 

Refer to your laptop's documentation for more information about your laptop's 

key combination.

No laptop image? Try pressing the Auto Image button on the remote. Get 
help on page 13.

turn on computer or 
video device

activate laptop’s external port

monitor key or 
LCD/CRT key

FN key

press Power button