JVC SP-THM45S ユーザーズマニュアル
Basic operations
18
On the remote control:
Press one of the source selecting buttons
(DVD, FM/AM, AUX or TV SOUND).
(DVD, FM/AM, AUX or TV SOUND).
DVD:
To play back a disc (DVD, Video CD etc.).
(
(
FM/AM:
To tune in an FM or AM (MW) station. (
Each time you press the button, the band alternates
between FM and AM (MW).
between FM and AM (MW).
AUX:
To select the source from a component connected to
the AUX IN jacks or DIGITAL IN jack. (
the AUX IN jacks or DIGITAL IN jack. (
Each time you press the button, the source alternates
between “AUX” and “AUX DIGITAL”.
between “AUX” and “AUX DIGITAL”.
TV SOUND: To select the TV (that outputs sound signals)
connected to the AV (SCART) connector. (
On the center unit:
Press SOURCE repeatedly until the source
name you want appears on the display
window.
name you want appears on the display
window.
Each time you press the button, the source changes as follows;
] DVD ] AM ] FM ] AUX ] AUX DIGITAL ] TV
SOUND ] (back to the beginning)
SOUND ] (back to the beginning)
The selected source name appears on the display window.
Example: When “AUX” is selected.
NOTE
• When a source except DVD is selected, this system does not output
video signals.
CAUTION
• Always set the volume to minimum level before starting any source.
If the volume is set at its high level, the sudden blast of sound could
permanently damage your hearing and/or blow out the speakers.
permanently damage your hearing and/or blow out the speakers.
You can adjust the volume level within the range from “0”
(minimum) to “70” (maximum).
(minimum) to “70” (maximum).
On the remote control:
Press AUDIO VOL + or –.
• Press + to increase volume.
• Press – to decrease volume.
• Press – to decrease volume.
On the center unit:
Turn VOLUME.
• Turn VOLUME clockwise to increase volume.
• Turn VOLUME counterclockwise to decrease volume.
• Turn VOLUME counterclockwise to decrease volume.
The volume level appears on the display window.
CAUTION
Be sure to turn down the volume;
Be sure to turn down the volume;
• Before connecting or putting on headphones as high volume may
damage both the headphones and your hearing.
• Before disconnecting headphones as high volume may be suddenly
output from the speakers.
Connect a pair of headphones to the PHONES jack on the center
unit. This cancels the surround mode (
unit. This cancels the surround mode (
A pg. 33) currently selected,
deactivates the speakers, turns the subwoofer’s power off, and
activates the headphone mode. “HEADPHONE” appears on the
display window.
activates the headphone mode. “HEADPHONE” appears on the
display window.
• Disconnecting a pair of headphones from the PHONES jack
cancels the headphone mode and activates the speakers at the
previously selected surround mode.
previously selected surround mode.
Headphone mode
When using the headphones, the following signals are output
regardless of your speaker setting;
• For 2 channel sources, the front left and right channel signals are
When using the headphones, the following signals are output
regardless of your speaker setting;
• For 2 channel sources, the front left and right channel signals are
output directly from the left and right headphones.
• For multi-channel sources, the front left and right, center and
surround channel signals are down-mixed and then output from
the headphones.
You can enjoy the down-mixed multi-channel sound source using
the headphones.
the headphones.
You can enjoy the down-mixed multi-channel sound source using
the headphones.
On the remote control:
Press MUTING.
“MUTING” appears on the display window and the sound turns off.
To restore the sound
Press MUTING again.
• Pressing AUDIO VOL +/– (or turning VOLUME on the center
Press MUTING again.
• Pressing AUDIO VOL +/– (or turning VOLUME on the center
unit) also restores the sound.
Selecting the source to
play
play
Adjusting the volume
Listening with headphones
Turning off the sound
temporarily
temporarily
1
TH-M45[B]-05Basic.fm Page 18 Monday, April 14, 2003 4:01 PM