JVC XV-THA35 ユーザーズマニュアル

Before turning on the system, turn on your TV if necessary and
select the correct video input. (See the manual supplied with your
TV.)
• When you use a JVC’s TV, you can turn on your TV by pressing

TV

 on the remote control, and select the video input by

pressing TV/VIDEO. (If your TV is not a JVC’s, see “Operating
Other Manufacturers’ TV” on page 59.)

• For changing the OSD messages—the information on the TV

The STANDBY lamp goes off and the illumination lamp
on the center unit lights up. The source indication selected
previously appears on the display.

0 to open the disc tray, then place a disc

• When using a CD single (8 cm), place it on the inner circle of the

disc tray.

• Continued use of irregular shape CDs (heart-shape, octagonal,

etc.) can damage the center unit.

• DO NOT use the disc stabilizer.

3

The disc tray closes. “READING” appears for a while.
• You can also start playback by closing the disc tray

using 

0 on the front panel.

To increase the volume,
press and hold AUDIO VOL +.
To decrease the volume,
press and hold AUDIO VOL –.

To increase the volume,
turn VOLUME control clockwise.
To decrease the volume,
turn VOLUME control counterclockwise.

Always set the volume to the minimum before starting any source. If
the volume is set at its high level, the sudden blast of sound energy
can permanently damage your hearing and/or ruin your speakers.

• By pressing AUDIO VOL + or – repeatedly, you can adjust the

volume level step by step.

• The volume level can be adjusted within 64 steps—

“MIN (minimum),” 01 to 62 and “MAX (maximum).”

• If you have turned off the unit with the volume level set at more than

level “25,” the volume level will be automatically set at level “25” next
time you turn on the unit.

CORRECT

INCORRECT

VOLUME

1

2

3

4

5

6

7

8

9

TV

VCR

0

SOUND

AUDIO

TV

AUDIO VOL
+/–

TV/VIDEO

SURROUND

7

MUTING

 

3

 

 DVD

DSP

EN10-18TH-A35[B].pm6

03.1.20, 11:26 AM

12