JVC TH-A10R ユーザーズマニュアル
16
The basic operations for this system are as follows.
To turn the system power supply
ON and OFF (standby)
ON and OFF (standby)
From the remote controls:
Press
AUDIO to turn power ON.
The STANDBY lamp goes off, and the current source name (or
station frequency) appears on the display window.
The center unit
station frequency) appears on the display window.
The center unit
button and
0 button will light up blue.
Press
AUDIO again to turn power OFF (standby).
The STANDBY lamp is lit.
On the front panel:
Press
to turn power ON.
The STANDBY lamp goes off, and the current source name (or
station frequency) appears on the display window.
The center unit
station frequency) appears on the display window.
The center unit
button and
0 button will light up blue.
Press
again to turn power OFF (standby).
The STANDBY lamp is lit.
Notes:
• The powered sub-woofer power supply is linked to the center unit.
• The powered sub-woofer power supply is linked to the center unit.
The green POWER ON lamp on the powered sub-woofer lights
when power is turned on, and goes off when power is turned off.
when power is turned on, and goes off when power is turned off.
• A small amount of power is consumed in the standby mode.
Remove both AC power cords from the AC outlets to turn the
center unit and powered sub-woofer off completely.
center unit and powered sub-woofer off completely.
To turn TV power ON and OFF
JVC TVs may be used as is with the primary and secondary remote
controls. TVs from other manufacturers require changes to the
transmittable signals before they can be used with the primary and
secondary remote controls. See page 57 for details of changing the
transmittable signals.
controls. TVs from other manufacturers require changes to the
transmittable signals before they can be used with the primary and
secondary remote controls. See page 57 for details of changing the
transmittable signals.
From the remote controls:
Press
TV to turn power ON.
Press
TV again to turn power OFF.
Adjusting volume
The volume level can be adjusted within the range of “0” (minimum)
to “80” (maximum).
to “80” (maximum).
From the remote controls:
Press VOLUME + or –.
Press VOLUME + to increase volume.
Press VOLUME – to decrease volume.
Press VOLUME – to decrease volume.
CAUTION:
Always set the volume to the minimum before starting any source.
If the volume is set at its high level, the sudden blast of sound
energy can permanently damage your hearing and/or ruin your
speakers.
Always set the volume to the minimum before starting any source.
If the volume is set at its high level, the sudden blast of sound
energy can permanently damage your hearing and/or ruin your
speakers.
Basic operations
Primary remote control
Secondary remote control
AUDIO
STANDBY lamp
Primary remote control
Secondary remote control
Primary remote control
Secondary remote control
On the front panel:
VOLUME + /–
VOLUME + /–
VOLUME + /–
AUDIO
TV
TV
TH-A10R[B]2/f1
00.7.3, 7:54 PM
16