JVC V-THD50 ユーザーズマニュアル

8

For better reception, install the XM Mini-Tuner Home 
Dock antenna in the following location:
– Near a south-facing window with aiming the 

antenna at the sky directly

– Where “Channel 1” can be heard clearly
– Where the Antenna Aiming display shows a value 

higher than 0 for either satellite or terrestrial signal 
strength (

17)

Make sure the antenna conductors do not touch any 
other terminals, connecting cords or power cords.

Connect the TV to the appropriate video out jacks to view 
the playback picture.

The picture quality order is as follows:
HDMI > Component video > S-video > Composite 
video
Make the following settings after connecting the TV:
– Color system and scanning mode (

15)

– MONITOR TYPE (

30)

You can make the following settings for the TV when 
the HDMI connection is used:
– HDMI DVI COLOR (

30)

– HDMI OUT (

30)

– HDMI AUDIO OUT (

30)

– DOWN  MIX  (

30)*

Use a certified HDMI cable, which has the HDMI 
logo.
You can use a monitor with a DVI terminal by 
connecting with a DVI-HDMI conversion cable.
When you play HDCP (High-Bandwidth Digital 
Content Protection) source, it takes a few seconds 
for the sound and picture to be transmitted to the 
speakers and TV while the confirmation process is 
completed.
On some TVs, no sound may come out during 
playback of sources such as DVD Audio even when 
the HDMI AUDIO OUT setting is “ON” (

30). 

* This setting is available only when the speaker position 

XM Mini-Tuner 
(not supplied)

XM Mini-Tuner Home Dock 
antenna (not supplied)

Extend it horizontally.

FM antenna 
(supplied)

(supplied)

Turn it until the best 
reception is obtained.

FM outdoor antenna

(not supplied)

Standard type (75 

Ω 

coaxial) connector

FM outdoor antenna cord 

(not supplied)

From HDMI input 
terminal

HDMI cable (not supplied)

Continued on the next page

TH-D70D50[UJ].book  Page 8  Friday, June 1, 2007  1:42 PM