HP (Hewlett-Packard) 2307890A ユーザーズマニュアル

Refer to the HP support Web site for detailed information 
on advanced video setup. Go to 
http://www.hp.com/support

and select your model number. See “HP Web Site 
Support” on page 171.

Use the 4-pin FireWire (IEEE 1394) connector on the front 
or 6-pin FireWire (IEEE 1394) connector on the back 
panel of the HP Digital Entertainment Center to connect a 
digital video camera. This connector is bi-directional.

Some cameras use a USB connector. See the 
documentation that came with your digital video camera. 
See “USB Device Connection” on page 121.

Most digital video cameras use either a 4-pin to 4-pin or 
a 4-pin to 6-pin FireWire (IEEE 1394) video camera 
transfer cable. A 4-pin to 4-pin FireWire (IEEE 1394) 
cable to use the 4-pin FireWire (IEEE 1394) connector on 
the HP Digital Entertainment Center front panel is sold 
separately.

The following instructions apply only to digital video 
cameras. See “Connecting an Analog Camcorder” on 
page 112 for analog video cameras. 

If a Digital Video Device Auto Play window appears 
when you connect your camera, click Cancel.

To connect a digital video camera:

Turn on the HP Digital Entertainment Center, and wait 
for the desktop to appear. See “Initial Configuration” 
on page 127.

Turn on the digital video camera.

Connect the video camera transfer cable from the 
camera to a FireWire (IEEE 1394) connector on 
the front (4-pin) or back (6-pin) of the HP Digital 
Entertainment Center.

A Found New Hardware message appears. Wait 
two or three minutes for the system to make the 
necessary settings for the new device. When 
installation is complete, a message appears telling 
you the camera is ready to use.