HP (Hewlett-Packard) 2307890A ユーザーズマニュアル

Switching: If you have multiple audio/video inputs on 
your TV or monitor, you can use your TV or monitor as an 
audio/video switch. You can use a TV remote control to 
switch inputs. If your AV receiver switches video and has 
the correct connections, you can connect your TV or 
monitor through your AV receiver.

Connectors: Choose Video Out connectors and 
corresponding cables that attach to the back of your TV 
and monitor:

You can use the following combinations to connect your 
TV and monitor:

You cannot view any combination of Component (Y, Pb, 
Pr) DVI, and VGA Video Out at the same time with dual 
displays.

Equipment: The TV, monitor, and some cables may not 
be included with the HP Digital Entertainment Center. See 
the documentation that came with your TV and monitor.

Configuration: You can adjust the TV and monitor 
displays, after initial turn on, using the Media Center. 
software. See “Initial Configuration” on page 127.

Connect a monitor video cable from the HP Digital 
Entertainment Center back panel Video Out directly 
to the monitor Video In. Use the VGA or HDMI Video 
Out connectors.

Connect your TV to the HP Digital Entertainment 
Center back panel. Use the Component (Y, Pb, Pr) 
Video Out connectors for standard definition TVs.

After initial turn on, you will need to activate dual 
displays. See “Dual screen” on page 140. 

Component 

(Y, Pb, Pr)

Component 

(Y, Pb, Pr)

VGA VGA 

HDMI HDMI 

VGA

Component (Y, Pb, Pr)
DVI

HDMI

Component (Y, Pb, Pr)
VGA

n

Component video output requires specific 
configurations for certain display types and 
resolutions. Go to http://www.hp.com/
support and select your model number for 
instructions on using component video. 

n