HP (Hewlett-Packard) 2307890A ユーザーズマニュアル
Connecting TV Source In
89
Connecting TV Source In
One Cable TV Box or Digital Cable
Receiver (NTSC)
Receiver (NTSC)
Connect the NTSC TV signal source from the standard
cable TV set-top box or digital cable receiver (sold
separately) into the HP Digital Entertainment Center.
cable TV set-top box or digital cable receiver (sold
separately) into the HP Digital Entertainment Center.
If you are using a standard set-top box or digital cable
receiver with S-video or composite video output, do the
following:
receiver with S-video or composite video output, do the
following:
1
Make sure that a coaxial cable connector from your
cable TV source (wall) is plugged into the set-top box
or digital cable receiver In connector.
cable TV source (wall) is plugged into the set-top box
or digital cable receiver In connector.
2
Connect a video cable:
a
Choose a video out connector:
■
Coaxial (RF)
■
Video (composite)
■
S-video
b
Connect the video cable from the set-top
box or digital cable receiver back panel Video
Output connector.
box or digital cable receiver back panel Video
Output connector.
c
Connect the video cable into the HP Digital
Entertainment Center back panel TV Source 1 In
connector.
Entertainment Center back panel TV Source 1 In
connector.
3
Connect stereo audio cables (skip this step if using
coaxial [RF]):
coaxial [RF]):
a
From the set-top box or digital cable receiver
back panel Audio Out right (red) and Audio Out
left (white) connectors.
back panel Audio Out right (red) and Audio Out
left (white) connectors.
b
Into the HP Digital Entertainment Center back
panel TV Source 1 In Audio right (red) and Audio
left (white) connectors.
panel TV Source 1 In Audio right (red) and Audio
left (white) connectors.
4
Connect the set-top box Infrared Transmitter cable
(required for signal). See “Infrared Transmitter
Connection” on page 97.
(required for signal). See “Infrared Transmitter
Connection” on page 97.