Manualsbrain.com
  1. マニュアル
  2. ブランド
  3. HP (Hewlett-Packard)
  4. 2307890A
  5. ユーザーズマニュアル

HP (Hewlett-Packard) 2307890A ユーザーズマニュアル

ダウンロード
ページ / 194
Connecting TV Source In
93
Connecting TV Source In
Satellite Connection
(Location, availability, and number of connectors may vary.)
One Satellite Receiver (NTSC) 
Connect the TV signal source from the satellite receiver 
into the HP Digital Entertainment Center.
If you are using a satellite receiver (sold separately) with 
S-video or composite video output, do the following:
1
Make sure that a coaxial cable connector from your 
dish source is plugged into the satellite receiver In 
connector.
2
Connect a video cable.
a
Choose a Video Out connector:
■
Coaxial (RF)
■
Video (composite)
■
S-video
b
Connect the video cable from the 
satellite receiver back panel video output 
connector.
c
Connect the video cable into the HP Digital 
Entertainment Center back panel TV Source 1 In 
connector.
3
Connect stereo audio cables (skip this step if using 
coaxial [RF]): 
a
From the satellite receiver back panel Audio Out 
right (red) connector and Audio Out left (white) 
connectors.
b
Into the HP Digital Entertainment Center back 
panel TV Source 1 In Audio right (red) and Audio 
left (white) connectors.
4