HP (Hewlett-Packard) Digital Entertainment Center ユーザーズマニュアル

The HP Digital Entertainment Center supports digital 
audio output.

■

For TV and music: two-channel stereo. (Your AV 
receiver may separate the audio signal into multiple 
channels.)

■

For DVD playback: the multiple channel Dolby 
Digital 5.1 or DTS Digital encoded audio signal 
passes to your AV receiver for decoding. Refer to 
your AV receiver product documentation.

You can connect the either coaxial or optical digital audio 
cable, depending on your system. If you have both 
cables, connect only one cable. Do not connect analog 
multichannel speaker outputs if you connect the digital 
output.

■

Insert optical cords straight in until they click into 
place.

■

Do not bend or tie optical cords.

To connect digital audio from your HP Digital 
Entertainment Center to an AV receiver:

Connect the Digital Out connector on the back panel 
of your HP Digital Entertainment Center, to the Digital 
Input (SPDIF) on your AV receiver or digital audio 
system.

Select the AV receiver input.

Use the AV receiver to adjust the volume.

The following diagram shows a typical advanced home 
theater audio six-channel 5.1 speaker installation that 
requires a digital input on an AV Receiver. This is only a 
suggested configuration. Your system may be different, 
such as having more speakers.

n

n