HP (Hewlett-Packard) Digital Entertainment Center ユーザーズマニュアル
80
HP Digital Entertainment Center
One Cable TV Box or Digital Cable Receiver
Connect the TV signal source from the Cable TV
set-top-box or digital cable receiver (not provided) into
the HP Digital Entertainment Center.
set-top-box or digital cable receiver (not provided) into
the HP Digital Entertainment Center.
If you are using a set-top-box or digital cable receiver
with S-video or composite video output, do the following:
with S-video or composite video output, do the following:
1
Make sure that a coaxial cable connector from your
cable TV source (wall) is plugged into the set-top-box
or digital cable receiver In connector.
cable TV source (wall) is plugged into the set-top-box
or digital cable receiver In connector.
2
Connect a video cable:
a
Choose a video out connector:
■
Coaxial (RF)
■
Video (composite)
■
S-video
b
Connect the video cable from the set-top-box or
digital cable receiver back panel Video Output
connector.
digital cable receiver back panel Video Output
connector.
c
Connect the video cable into the HP Digital
Entertainment Center back panel TV Source 1 In
connector.
Entertainment Center back panel TV Source 1 In
connector.
3
Connect stereo audio cables (skip this step if using
coaxial [RF]):
coaxial [RF]):
a
From the set-top-box or digital cable receiver
back panel Audio Out right (red) and Audio Out
left (white) connectors.
back panel Audio Out right (red) and Audio Out
left (white) connectors.
b
Into the HP Digital Entertainment Center back
panel TV Source 1 In Audio right (red) and Audio
left (white) connectors.
panel TV Source 1 In Audio right (red) and Audio
left (white) connectors.
4
Connect the set-top-box Infrared Transmitter cable
(required for signal). See “Infrared Transmitter
Connection” on page 88.
(required for signal). See “Infrared Transmitter
Connection” on page 88.