Lenoxx Electronics HT-391 ユーザーズマニュアル

ページ / 26
IB-HT391-WM-E-073003
12
1. Connect the 5 satellite speakers as shown on Page 8 (or the QUICK SETUP DIAGRAM packed with the set).
2. Insert the stereo audio cables (included) into the AUX AUDIO INPUT L (left=white) and R (right=red) jacks or any
available set of input jacks on the back of your HOME THEATER SYSTEM, and into the corresponding AUDIO OUT
jacks on your TV, this will allow your TV’s sound to play through your HOME THEATER SYSTEM.
NOTE: On some TVs, you may have to activate the audio out jacks of your TV. See your TV’s booklet.
3. Insert the AC power cord into an AC outlet.
4. Make sure the POWER switch on the back of the main unit is at “ON” position. Next press the ON/STANDBY button
on the front of the main set or on the REMOTE to turn the set on (or off).
5. Press the INPUT SOURCE button several times till the AUX indicator lights.
NOTE: The  factory’s  default  input  source  is  DVD  with 5.1  channel sound  output. When  the  set  is turned  to
ON,  the  DVD  indicator  and  5.1 channel  indicator will  be on  and sound  will come  out of  5 speakers  plus
the subwoofer. To change 5.1 channel to 2 channel output, press the SPEAKER CHANNELS button. The sound
will come out of only 2 front speakers plus the subwoofer.
6. Go to Page 21 for other detailed instructions.
NOTE: Your cable or antenna connection to your TV are not touched with this connection. Leave your antenna cable
to your TV as you normally would. No changes will be made to your current antenna connections.
TV CONNECTIONS
Home Theater System + TV 
(if your TV has Audio Output jacks)
(If you don’t have a DVD player yet)
CONNECT ALL SPEAKERS AS  SHOWN ON PAGE 8  (OR THE  QUICK SETUP DIAGRAM SHEET)
NOTE: On some TVs, these jacks are in the front,
or your TV may not have these jacks.
If you have a cable box or satellite receiver, you
can connect the receiver AUDIO OUTPUT directly
to your AUX INPUT or any available set of input
ja cks   on  the   ba ck  o f  the  HOME  TH EAT ER
SYSTEM.
NOTE: If your TV does not have audio output  jacks,
your TV’s sound cannot be heard through
the surround sound system. But, you can
still use it for your DVD player etc.