Epson PowerLite Cinema 1440 ユーザーズマニュアル
3.
Connect the other end of the cable (if applicable) to your device.
Parent topic:
Related topics
Selecting the Connected USB Source
You can switch the projector's display to the source you connected to the USB-A port.
1.
Make sure the connected USB source is turned on, if necessary.
2.
Press the USB button on the remote control.
3.
Press the button again to cycle through other USB sources, if available.
Parent topic:
Disconnecting a USB Device or Camera From the Projector
When you finish presenting with a connected USB device or camera, you must prepare to disconnect the
device from the projector.
device from the projector.
1.
If the device has a power button, turn off and unplug the device.
2.
Disconnect the USB device or camera from the projector.
Parent topic:
Installing Batteries in the Remote Control
The remote control uses the two AA batteries that came with the projector.
Caution: Use only the type of batteries specified in this manual. Do not install batteries of different types,
or mix new and old batteries.
or mix new and old batteries.
34