Sanitaire SC5800 Series ユーザーズマニュアル

Motor will not start.

Push plug securely into outlet.
Try another outlet.
Check circuit breaker.

Motor suddenly

Thermal Cut Off, see Page 2.

 stops.

Does not clean the

Clean or replace the filters: Hint: If picking

carpet or floor.

up fine dust, the filters may not look dirty, but a
fine substance tends to reduce suction when it
blocks the airflow through the filters.

Be sure the dust bag is properly seated into the
cleaner body. Page 8.

Replace dust bag. Page 8.

Be sure hose adapter is secure on back of cleaner.
Page 11.

Check base hose and long hose. Page 11.

Replace a broken, cut, loose or out of shape belt.

Clean hair and thread from bristles and end cap
area.

Replace brush roll if bristles are worn.

No suction at the

Be sure hose adapter is secure. Page 11.

end of hose.

Clean or replace filters. Hint: If picking up fine dust,
the filters may not look dirty, but a fine substance
tends to reduce suction when it blocks the airflow
through the filters.

Remove any clogs from the hose that restrict the
airflow. Check base hose and long hose. Page  11.

Replace dust bag. Page 8

Headlight not

Replace light bulb. Page 9.

working.

Noise from brush

Remove hood and clean debris or items

roll area.

from the brush roll area.

Replace a broken, cut, loose or out of shape belt.
Page 10.

Cleaner is hard to

Put handle in operating position. Tilt the

push.

cleaner back to raise the front wheels off floor.
Then turn the knob to a higher setting.

Replace a broken, cut loose or out of shape belt.
Page 10.

Cleaner height knob

Hint: Put handle in operating position. Tilt

will not turn.

the cleaner back to raise the front wheels off floor.
Then turn the knob.

Bag Cover will not go

Dust bag must be installed properly in cleaner or

onto cleaner properly.

bag cover will not go onto cleaner. Make sure the
dust bag cardboard flange is on the support shelf.
See page 6.

Hood will not come off.

Hood cannot be removed from cleaner unless the
cleaner height setting is in the lowest or highest
position.

All three screws must be removed from the top of
the hood. Page 10.

Missing parts or

Call 1-800-800-8975 between 8 a.m. to 7:30 p.m.
(CST), Monday through Friday and 10 a.m. to 6:30
p.m, Saturday. Know the model and serial num-
bers when you call.

questions?

Part No. 73524

 

(10/03)

©2003 White Consolidated, Ltd.

Printed in U.S.A.