Shark EP602RF ユーザーズマニュアル

If the suction opening in the unit or the hose is BLOCKED, switch off 
the vacuum cleaner and remove the blocking substance before you 
start the unit again.

1. Do not operate the vacuum cleaner 

too close to heaters, radiators or 
cigarette butts.

2. Before inserting the power plug into 

the wall outlet, make sure that your 
hands are dry.

4. When pulling out the power plug 

from the wall outlet, pull the plug not 
the power cord.

3. Before you start vacuuming, make 

sure to remove large or sharp objects 
that might damage the dust cup 
debris screen.

5. Do not pick up anything that is 

burning or smoking such as 
cigarettes, matches or hot ashes.

6. Do not use without ALL filters in 

place.

Always remove the 

power plug from the wall outlet 

before assembling or removing 
accessories.

• Insert the telescopic tube into the hole

next to the dust cup handle.  Make sure 
that the slot in the handle fits correctly 
into the opening. (Fig. 1)

• To remove the telescopic tube, press 

the telescopic tube release button and 
pull the tube up.

Push the plastic button and pull out the
smaller tube.  See illustration below

.

• Insert the floor brush into its location, 

in the direction of the arrow.

• To remove the floor brush from the 

main unit, press on the floor brush 
release button and pull the floor brush 
out. (Fig. 2)

• Hold the end of the hose.

Insert the hose into the hose 
connector (Fig. 3).

Fig. 1

Fig. 3

Fig. 2