Euro-Pro FC251 ユーザーズマニュアル

4. Fitting the Floor Brush to the 

Push the telescopic 
tube into the floor 

brush as show in 

the illustration 

at right.

3. To rewind the power cord, press the 

cord rewind button with one hand 

and guide the power cord with the 

other hand to ensure that it does not 

whip causing damage or injury.

Always remove the power plug 

from the wall outlet before assembling or 

removing accessories.

1.

Crevice Tool
For radiators, crevices,

corners, baseboards and 

between cushions.

2.

Upholstery Brush
The dusting brush is used 

for the furniture

3.

Dusting Brush
The dusting brush is used 

for the furniture, venetian 

blinds, books, lamp shades 

and shelves.  This is just 

snapped on to the upholstery 

brush.

Air intake duct

Power cord receptacle

1.

Connect the flexible hose into the air 

intake duct. Push in until you hear a 

“click”, indicating it is in its locked 

position.
To remove the flexible hose first 

remove the power nozzle cable from 

the socket, then depress locking 

button and remove hose.
Connect the connecting power cord 

from the flexible hose to the power 

cord receptacle that is on the unit 

just below the air intake duct.

Cord Rewind Button

1.

Connecting the power nozzle with 

the telescopic tube:
A) Depress the button on the 

telescopic tube and insert it into 

the slot on the power nozzle 

elbow.

B) Push the telescopic tube down 

until you hear a "click".

(see illustration below). 

4. To adjust the suction,slide the 

variable suction control button to 

control the suction power of the 

vacuum cleaner. See illustration 

below.

Your vacuum cleaner includes a  

variable suction control valve on the 

hose extension. The suction power can 

be adjusted by moving the slide to the 

desired position. For example. Less 

suction is required on upholstery and 

draperies compared to thick shag 

carpets, which require maximum 

suction.

Telescopic 

Tube

Power

Nozzle

5

Once all attachments are in 
place, unwind a sufficient length 
of cable and insert the plug into 
the wall outlet. A yellow mark on 
the power cord shows the ideal 
cable length. Don't pull the power 
cord beyond the red mark.

2. Fitting the Telescopic Tube 

Push the extension tube into the 
curved wand / hose extension, as 

shown in the illustration below.

3. Extending the Chrome

Push forward on the plastic button 
and pull the inner chrome tube 

outward.

Important: 

This motor is equipped with 

a motor protective thermostat. If for some 

reason the vacuum cleaner should 

overheat, the thermostat will 

automatically turn the unit off.  Should 

this occur, unplug the vacuum cleaner 

from the wall outlet and turn off switch.  

Remove dust cup and empty. Clean dust 

cup filter. Allow the unit to cool for 

approximately 1 hour. To restart, re-plug 

into wall outlet and turn switch back on.

2.

Insert the power nozzle cord plug 

into the power socket on the electric 

hose. To start power nozzle press 

the On/Off button that is located on 

the power nozzle.  

1. Insert the power plug into the wall 

outlet.

2. Press the Power On/Off button 

located on the unit to turn the 

vacuum cleaner "On".

Power On/Off 

Button

4