Nilfisk Alto ATTIX 791-2M/B1 ユーザーズマニュアル
8
ATTIX 791-2M/B1
6 After finishing work
6.1
Switching the vacuum
cleaner off and storage
cleaner off and storage
1. After picking up hazardous
dust, vacuum clean the out-
side of the cleaner.
side of the cleaner.
2. Switch off the vacuum clean-
er and pull the mains plug
out of the socket.
out of the socket.
3. Wind up the power cord and
hang it on the handle.
4. Empty the tank and clean the
vacuum cleaner.
5. After picking up liquids: Store
the upper section of the
cleaner separately so that
the filter element can dry.
cleaner separately so that
the filter element can dry.
6. Store the vacuum cleaner
in a dry room where it is
protected from unauthorized
use.
protected from unauthorized
use.
7 Maintenance
7.1 Maintenance
plan
When replacing
the filter bag,
waste bag or filter
element
After finishing
work
As required
7.2.1
check the antistatic
Clamps
Clamps
7.2.2
Replacing the waste bag
7.2.3
Replacing the filter bag
7.2.4
Emptying the dirt tank
7.2.5
Replacing filter element
7.2.6
Replace the filter for air
supply to motor
supply to motor
7.2 Maintenance
work
7.2.1 check the antistatic
clamps
1. Check the anti-
static clamps
(1) for dam-
age and have
them replaced
by Nilfisk-Alto
Service if nec-
essary.
(1) for dam-
age and have
them replaced
by Nilfisk-Alto
Service if nec-
essary.
Do not use the cleaner with
damaged or missing antistatic
clamps. Risk of explosion due
to static discharge in explosive
atmospheres.
damaged or missing antistatic
clamps. Risk of explosion due
to static discharge in explosive
atmospheres.
1
1
1
1
1