Nilfisk Alto 30 H ユーザーズマニュアル
25
english
ATTIX 30/50 H/M
32
27
36
38
ø
ø
ø
ø
7.2.8 Replacing filter element
"M" (XtremeClean
System)
System)
During the following work, ensure
that dust is not unnecessarily
spread around, Wear a P2 breath-
ing mask.
that dust is not unnecessarily
spread around, Wear a P2 breath-
ing mask.
Never use the vacuum cleaner
without a filter.
without a filter.
1. Switch off the vacuum
cleaner and pull the mains
plug out of the socket.
plug out of the socket.
2. Open the retaining clamps
(A) and remove the up-
per section of the vacuum
cleaner.
per section of the vacuum
cleaner.
Removing the filter elements:
3. Open filter tension part (B).
4. Remove carefully the cas-
3. Open filter tension part (B).
4. Remove carefully the cas-
settes with filter elements.
Inserting the filter elements:
5. Insert new filter elements
(C) into the cassettes (D).
6. Attach the cassettes with
the filter elements onto the
upper section of the vacuum
cleaner.
upper section of the vacuum
cleaner.
7. Fix the filter tension part
(B).
8. Dispose of the used fil-
ter elements in accord-
ance with legal regulations.
ance with legal regulations.
9. Attach the upper section of
the vacuum cleaner.
10. Close the retaining clamps
(A). Ensure that the retain-
ing clamps fit properly.
ing clamps fit properly.
32
27
36
38
ø
ø
ø
ø
A
A
A
A
B
B
C
D
B