Tascam MD-02B ユーザーズマニュアル

TASCAM MD-02/MD-02B

Adjusting the recording level

Adjust the recording level while monitoring the input
signal or watching the meters.

For analog input, use the

INPUT

knobs (L, R) on the main

unit and the “REC VOLUME?” item in the menu to adjust
the recording levels. Use this menu item when “REC
VOLUME?” is first set to “0dB” and you cannot adjust
with the

INPUT

knob.

For digital input, use the “REC VOLUME?” item in the
menu to adjust the recording level.

Adjust the levels so that the meters do not reach “OVER.”

Adjusting level with the REC VOLUME

menu item

1. Press the

key on the main unit or the remote

control.

2. Use the

MULTI JOG

dial on the main unit or the

+/– keys on the remote control to select “REC
VOLUME?”

3. Press the

MULTI JOG

dial on the main unit or the

ENTER

key on the remote control.

4. Use the

MULTI JOG

dial on the main unit or the +/–

keys on the remote control to adjust the input level.
The adjustment options are –∞ and –48 to +12 dB.
The default value is 0 dB.

5. Press the

MULTI JOG

dial on the main unit or the

ENTER

key on the remote control.

Recording a track

When in recording standby, press the

PLAY

key to

start recording.

Press the

STOP

key to stop recording. After pressing

the

STOP

key, “UTOC Writing!” is shown as the

U–TOC is written to the disc.

If the disc remaining time becomes four seconds during

•

recording, recording automatically fades out and stops.

Discs used in this unit can have a maximum of 254

•

recorded tracks. If you press the

READY

key while

recording the 254th track, recording ends and the unit
stops.

CAUTION

When "UTOC Writing!" is blinking, the recording is
being written to the MD. Unplugging the power cord or
moving the unit could prevent the recording from being
correctly written to the disc.

Press the READY key to pause recording.

•

To eject the disc, press the EJECT key on the main unit

•

when the disc is stopped.

Precautions when recording

If “W_Protected!” is shown, an MD that cannot be
recorded because the write-protection tab is engaged or
an MD that can only be played back might be loaded. In
the former case, slide the write-protection tab to close the
opening, enabling the disc for recording.

To prevent the accidental erasure of recorded contents after
recording an MD, slide the write-protection tab to open the
opening, disabling recording to the disc.

Back of MD

Write protection

tab

Open the

opening

Creating new tracks (incrementing track

numbers)

Adding a track number for each recorded song is conve-
nient for returning to the beginning of the song during
editing and playback. Tracks can be added (track numbers
incremented) manually or automatically during recording.
They can also be edited after recording.

CAUTION

Discs cannot have more than 254 tracks.

•

Tracks cannot be added if the disc remaining time is

•

four seconds or less.

Automatically creating tracks (auto track

function)

Using the auto track function, tracks can be automatically
created (incrementing track numbers) when recording.

The auto track mode can be set to “OFF,” “Level” or
“Time” using the

AUTO TRACK

key on the remote control.

It can also be set by selecting the “A_TRK?” menu item.

1. Press the

key on the main unit or the remote

control.

2. Use the

MULTI JOG

dial on the main unit or the +/–

keys on the remote control to select “A_TRK?”

3. Press the

MULTI JOG

dial on the main unit or the

ENTER

key on the remote control.

4. Use the

MULTI JOG

dial on the main unit or the +/–

keys on the remote control to select “OFF,” “Level”
or “Time.” The default value is OFF.

6 − Recording