Emerson 2400S ユーザーズマニュアル
![Emerson](https://files.manualsbrain.com/attachments/1ef3aaad462e024fde6cecf537a4c6c781334d44/common/fit/150/50/6dab323528eefa0342baa74a10c15551c3b956250cf9d62f2117dcdf42a7/brand_logo.jpeg)
30
Micro Motion
®
Model 2400S Transmitters
I/O Wiring – Model 2400S PROFIBUS-DP and DeviceNet Transmitters
4.4
I/O wiring for Model 2400S DeviceNet transmitters
Connect the transmitter to the DeviceNet segment according to the diagram in Figure 4-3. The
transmitter is shipped with a DeviceNet male sealed Micro Connector (Eurofast) that has been
preinstalled and wired according to the DeviceNet specification.
transmitter is shipped with a DeviceNet male sealed Micro Connector (Eurofast) that has been
preinstalled and wired according to the DeviceNet specification.
Follow all local safety regulations.
Figure 4-3
Model 2400S DeviceNet I/O wiring
WARNING
A transmitter that has been improperly wired or installed in a hazardous area
could cause an explosion.
could cause an explosion.
To avoid the risk of an explosion:
•
Make sure the transmitter is wired to meet or exceed local code requirements.
•
Install the transmitter in an environment that complies with the classification tag
on the transmitter. See Appendix A.
on the transmitter. See Appendix A.
➯
Attach a 5-pin female
Eurofast connector here