ICOM S-14217HZ-C1 ユーザーズマニュアル
5 - 2
¤ ENTERING ADJUSTMENT MODE
q Turn the power OFF.
w Connect the JIG cable (see page 5-1) to the [MIC/SP] jack.
e Turn the "S1" of the JIG cable ON.
r While pushing [FUNC], [BAND] and [Y] key, turn the
power ON.
t Turn the "S1" of the JIG cable OFF, then start the adjust
ment.
power ON.
t Turn the "S1" of the JIG cable OFF, then start the adjust
ment.
During adjustment mode, the function dispaly shows the ad-
justment item, frequency, etc. as below.
justment item, frequency, etc. as below.
!DJUSTMENT
!DJUSTMENT
¤ QUITING ADJUSTMENT MODE
• Turn the power OFF.
¤ KEY ASSIGNMENTS FOR ADJUSTMENT MODE
•
: Selects the next adjustment item.
•
: Selects the previous adjustment item.
• [DIAL] : Adjusts the value for the item manually.
• + : Adjusts the value for the item automatically.
•
: Stores the set value.
NOTE: The set value storing is inhibited
during transmit. Release PTT
switch to return to receive first,
then push this key to store the
set value.
during transmit. Release PTT
switch to return to receive first,
then push this key to store the
set value.
3#!.
3-7