Electrolux Z2250 ユーザーズマニュアル
Assembly Parts
Crevice Nozzle or
Nested Extension Tubes (on some models).
Nested Extension Tubes (on some models).
Dusting Brush.
Hose.
Vacuum Cleaner Body.
Electrical Cord.
Handle.
Screws located in the accessory package.
1
2
3
4
6
5
1
2
3
4
5
6
How To Assemble
CAUTION: Assemble the cleaner before using.
CAUTION: Moving parts, make sure ON/OFF switch is in
CAUTION: Moving parts, make sure ON/OFF switch is in
the OFF position before plugging in.
1 Grasp dustbag cover
handle and pull away
from vacuum body to
remove door.
from vacuum body to
remove door.
2 Slide the handle into the
grooves at the top of the
vacuum body as shown.
vacuum body as shown.
Place the two screws
(supplied) into the holes
at the top of the dustbag
compartment and tighten
with a screwdriver.
(supplied) into the holes
at the top of the dustbag
compartment and tighten
with a screwdriver.
3
4 Place the tabs on the
bottom of the dustbag
cover into slots at the
b o t t o m o f t h e b a g
compartment and rotate
door up and push against
the vacuum body until it
snaps shut.
cover into slots at the
b o t t o m o f t h e b a g
compartment and rotate
door up and push against
the vacuum body until it
snaps shut.
5 Place the hose on the back
of the vacuum, wrapping it
up and over the hose hook
as shown.
up and over the hose hook
as shown.
Firmly push the end of
the hose into the hose
retainer on the back of the
vacuum.
the hose into the hose
retainer on the back of the
vacuum.
6
7
4
7