Electrolux Z2900 Series ユーザーズマニュアル
Assembly Parts
Nested extension tubes and Crevice Nozzle (Pull
apart.)
apart.)
Dusting Brush.
Hose.
Vacuum Cleaner Body.
Electrical
Cord.
Handle.
Screws located in the accessory package.
1
2
3
4
6
5
1
2
3
4
5
6
How To Assemble
CAUTION: Assemble the cleaner before using.
CAUTION: Moving parts, make sure ON/OFF switch is in
CAUTION: Moving parts, make sure ON/OFF switch is in
the OFF position before plugging in.
1 Grasp dustbag/Smartbox
cover handle and pull
away from vacuum body
to remove door.
away from vacuum body
to remove door.
2 Slide the handle into the
grooves at the top of the
vacuum body as shown.
vacuum body as shown.
Place the two screws
(supplied) into the holes
at the top of the dustbag/
Smartbox compartment
a n d t i g h t e n w i t h a
screwdriver.
(supplied) into the holes
at the top of the dustbag/
Smartbox compartment
a n d t i g h t e n w i t h a
screwdriver.
3
4 Place the tabs on the
bottom of the dustbag/
Smartbox cover into slots
at the bottom of the bag
compartment and rotate
door up and push against
the vacuum body until it
snaps shut.
Smartbox cover into slots
at the bottom of the bag
compartment and rotate
door up and push against
the vacuum body until it
snaps shut.
5 Place the hose on the back
of the vacuum, wrapping it
up and over the hose hook
as shown.
up and over the hose hook
as shown.
Firmly push the end of
the hose into the hose
retainer in the hood of the
vacuum.
the hose into the hose
retainer in the hood of the
vacuum.
6
7
4