Electrolux Z2270-Z2290 Series ユーザーズマニュアル

How to Check and Clear Hose Blockages

Low suction or poor pickup may be due to a blockage in the vacuum cleaner.

1. Remove attachment hose and check suction at end of hose

– if little or no suction, check disposable dust bag. Change
if needed. If no improvement proceed to step 2.

NOTE: Turn off the switch and unplug the electrical cord

before clearing hose.

2. Remove bag cover and disposable dust bag.

3. Remove tube inside dust bag compartment by removing 3

screws.

Check for any obstructions that may be in the hose. Any
obstructions can be removed by using a blunt instrument to
clear the hose. Flexing the hose may help loosen the clog.

4. Reinstall the tube after clearing any clog. Reinstall the

disposable dust bag and bag cover.

NOTE: If no improvement in performance on carpet, proceed

to following page.

2. Remove bag cover. Press down on handle latch and

lift cover away from cleaner.

1. Remove attachment hose and check

suction at end of hose.

3. R e m o v e t u b e i n s i d e d u s t b a g

compartment by removing 3 screws.

Handle
Latch