Electrolux CycloneXL ユーザーズマニュアル

CycloneXL should only be used by adults and only for 

normal vacuuming in a domestic environment. The 

vacuum cleaner features double insulation and does 

not need to be earthed. Disconnect the plug from the 

mains before cleaning or maintenance of the vacuum 

cleaner. Be sure to keep the vacuum cleaner in a dry 

place. All servicing and repairs must be carried out by 

an authorised Electrolux service centre.

Never vacuum:

•  In wet areas.

•  Close to flammable gases etc.

•  When housing shows visible signs of damage.

•  Sharp objects, fluids.

•  Hot or cold cinders, lit cigarette butts, etc.

•  Fine dust, for example from plaster, concrete, flour, 

hot or cold ashes.

The above may cause serious damage to the motor 

– damage which is not covered by the warranty.

Regularly check that the cable is not damaged. Never 

use the vacuum cleaner if the cable is damaged. 

Damage to the machine’s cable is not covered by the 

warranty.

1*  Telescopic tube
*  Extension tubes
  Hose handle + hose
  Combination floor 

nozzle

  Crevice nozzle
6  Upholstery nozzle

7  Accessories clip
8*  Turbo nozzle
9*  Parquet nozzle
10* Feather duster

* Certain models only. 

11  Open the front cover on the machine and check 

that the motor filter and the dust container filter 

are in place. (See also Cleaning/replacing the 

filters.)

1*  Open the back lid on the machine and check that 

the exhaust filter is in place.

1  Insert the hose until the catches click to engage 

(press the catches to release the hose).

 

Insert the hose into the hose handle until the 

catches click to engage (press the catches to 

release the hose).

1  Attach the extension tubes* or telescopic tube* 

to the hose handle and nozzle by pushing and 

twisting together. (Twist and pull apart to dis-

mantle.)

1  Extend the electric cable and connect it to the 

mains. The vacuum cleaner is fitted with a cable 

winder. Once the electric cable has been exten-

ded, it stays in that position.

16  To rewind the cable, press the cord rewinder 

pedal. The cable will then rewind.

17a  Start the vacuum cleaner by rotaring the power 

control in the direction of the “Max” position. 

Increase suction power by rotaring the control 

further up to “Max” position. Stop the vacuum 

cleaner by rotaring in the opposite direction to 

“Off” position.

“Max” position.
17b* Suction power can also be adjusted by using the 

suction control on the hose handle.

18  Ideal parking position for pausing (18a) and 

storing (18b). 

* Certain models only.