Electrolux HP5500 ユーザーズマニュアル

ページ / 15
How to Check and Clear Hose Blockages
Low suction or poor pickup may be due to a blockage in 
the vacuum cleaner.
  1. Remove hose from hose retainer and check suction at end 
of hose - if little or no suction, check disposable dust bag. 
Change if needed. If no improvement proceed to step 2.
CAUTION: Turn  off  the  switch  and  unplug  the 
electrical cord before clearing hose.
  2. Remove electrical cord from cord hooks. Disconnect the 
clear tube by turning quarter turn fastener to the right to 
release, then lift away from cleaner.
    Check for any obstructions that may be in the tube. Any 
obstructions can be removed by using a blunt instrument 
to clear the tube. 
  3. To completely release hose from the unit, remove two 
screws. 
    Any  obstructions  can  be  removed  by  using  a  blunt 
instrument to clear the hose. Flexing the hose may help 
loosen the blockage.
After clearing blockage, reverse above steps to reassemble unit.
2.  Disconnect Clear Tube.
1.  Remove hose from hose retainer and 
check suction at end of hose.
3.  Release hose from unit.
1
8
Hose 
Retainer
Clear 
Tube
2
Quarter Turn 
Fastener 
3
Two Screws
Electrical 
Cord