Honeywell TR70-H ユーザーズマニュアル

OPERATING GUIDE

63-2719-03

Zio

®

/Zio Plus LCD Wall Modules

TR70, TR71, TR75 with Sylk

®

 Bus

APPLICATION

The Zio TR70 Series (TR70, TR70-H, TR71, TR71-H, TR75, 

and TR75-H OS numbers) LCD Wall Modules provide an 

operator interface for monitoring and adjusting parameters in 

the wall module itself and in the programmable controller 

(refer to the

 Honeywell Spyder

®

 User’s Guide, 

form 63-2662, 

or the 

ComfortPoint™ Programmable Controller User’s Guide, 

form 63-2663, depending on the programmable controller 

used) to which it is wired. The wall module may be customized 

and supports both a contractor and a tenant user interface.

NOTE: This document illustrates the wall module configura-

tion process using information from the 

Honeywell 

Spyder User’s Guide 

(form 63-2662).

The wall module has a snap in mounting to a subbase that 

may be mounted on a wall, on a standard utility conduit box, or 

on a 60 mm wall outlet box. Wiring connections to the wall 

module are made through a cutout in the back of the wall 

module.
All models have a space temperature sensor, network bus 

jack, and an LCD panel with three softkeys and two Up/Down 

adjustment keys. Models with -H also include an onboard 

humidity sensor.

PREFACE

This Operating Guide is intended to provide configuration 

information (using the Niagara Workbench tool) and a general 

overview of the TR70 Series operator interface. Configuration 

begins with “Initial Power-Up” on page 2, and the general 

overview begins with “Operating the Zio Wall Module” on 

page 19.
It is intended to guide you through the features and operation 

of the TR70 Series as you interface with the programmable 

controller and establish pre-programmed or custom 

configurations.

Fig. 1. LCD Wall Module features.

Contents

LCD PANEL

M27344

SOFTKEYS (3)

UP/DOWN 

ARROW KEYS

NETWORK BUS PORT (ON BOTTOM OF CASE)