ritetemp GPMG8010 プリント

50   60   70   80   90

PG

 1

PG

 2

Statement of use:  The GPMG8010 can be used with most 
24 volt gas, oil or electric heating systems, zoned heating 
systems, heat pumps with or without auxiliary heat, or gas 
millivolt heating systems. It cannot be used with 120 volt 
heating systems.  

1  Configure

ï Set HEAT/COOL mode switch to 

HEAT or COOL.   Set the Fan 

switch to AUTO (automatic).

Once you have installed the 

thermostat, follow the instructions 

below to operate your new 

thermostat.

Your thermostat is now in operation.

ï In the winter, set the system switch to 

HEAT to control your heating system.

ï In the summer, set the system switch to 

COOL to control your air conditioner.

ï In spring and fall or when windows are 

open, you can set the system switch OFF.

ï Setting the FAN switch to AUTO 

automatically runs your system's fan 

during heating and cooling.

ï Setting the FAN switch to ON runs your 

system's fan continuously even without 

heating or cooling.

NOTE: LED blinks when batteries are low. 

Caution:  System will stop when batteries die.

2  Set Temp

3  Operate

Turn the Temperature control to 

select the desired temperature. 

ï Warmer - to the right

ï Cooler - to the left.

COOLER

WARMER

50   60   70   80   90

Temperature 
Control

Thermometer

HEAT/COOL
Mode Switch

Low Battery
indicator

Fan 

Switch