Denon AVR-4810CI ユーザーズマニュアル
Get
ting Star
ting Star
ted
Connections
Set
tin
g
tin
g
s
Pla
ybac
Pla
ybac
k
Remot
e Contr
ol
Multi-z
one
Inf
or
or
mation
Tr
oubleshooting
Specifications
Set
tin
g
tin
g
s
Make the Optimal Speaker Settings, and Correct the Room Acoustics (Audyssey™ Auto Setup)
Exiting the GUI Menu
Press
MENU
while the GUI menu is displayed.
The GUI menu display disappears.
n
If there is a disparity between the results and the connection status,
or if an error message is displayed, check the error message against
the errors listed in the “Error Messages” section (vpage 37) and
perform Audyssey Auto Setup again.
If the result still differs from the actual connection status after
remeasurement or the error message still appears, it is possible
that the speakers are not connected properly. Turn the AVR-4810CI
off, check the speaker connections and repeat the measurement
process from the beginning. Turn the AVR-4810CI off, check the
speaker connections and repeat the measurement process from the
beginning.
If you change a speaker position or orientation, perform Audyssey
Auto Setup again to obtain optimal equalizer correction.
or if an error message is displayed, check the error message against
the errors listed in the “Error Messages” section (vpage 37) and
perform Audyssey Auto Setup again.
If the result still differs from the actual connection status after
remeasurement or the error message still appears, it is possible
that the speakers are not connected properly. Turn the AVR-4810CI
off, check the speaker connections and repeat the measurement
process from the beginning. Turn the AVR-4810CI off, check the
speaker connections and repeat the measurement process from the
beginning.
If you change a speaker position or orientation, perform Audyssey
Auto Setup again to obtain optimal equalizer correction.
•
•
•
NOTE
After performing Audyssey Auto Setup, do not change the
speaker connections or subwoofer volume. In event of a change,
perform Audyssey Auto Setup again.
speaker connections or subwoofer volume. In event of a change,
perform Audyssey Auto Setup again.
Main remote control unit
operation buttons
:Displaying the menu
Cancel the menu
Cancel the menu
:Moves the cursor
(Up/Down/Left/Right)
(Up/Down/Left/Right)
:Confirm the setting
:Return to previous menu
STEP6 Store
7
Select “Store” and
then press
ENTER
.
Save
the
measuring
results.
The save operation
takes about 30 seconds
to complete.
takes about 30 seconds
to complete.
b
NOTE
During saving of measuring results, be sure not to turn off the
power.
power.
8
When the screen
shown on the right
appears, unplug the
setup
microphone
from the AVR-4810CI
SETUP MIC jack.
9
Select “Exit” and then press
ENTER
.