Elite Video vsx33 ユーザーズマニュアル

En

To navigate songs on your iPod, you can take advantage 
of the GUI screen of your TV connected to this receiver.

1

 

You can also control all operations for music in the front 
panel display of this receiver.

Finding what you want to play
When your iPod is connected to this receiver, you can 
browse songs stored on your iPod by playlist, artist name, 
album name, song name, genre or composer, similar to 
using your iPod directly.

/ to select ‘Music’ from the iPod top menu.

/ to select a category, then press ENTER to 

• To return to the previous level any time, press 

RETURN.

/ to browse the selected category (e.g., 

• Use 

/ to move to previous/next levels.

 to start playback.

• You  can  play all of the songs in a particular category 

by selecting the All item at the top of each category 
list. For example, you can play all the songs by a 
particular artist.

Basic playback controls
This receiver’s remote control buttons can be used for 
basic playback of files stored on an iPod.

2

• Press iPod USB to switch the remote control to the 

iPod/USB operation mode.

You can switch over the iPod controls between the iPod 
and the receiver.

This enables operation and display on your iPod, and this 
receiver’s remote control and GUI screen become 
inactive.

It is possible to play files

4

 using the USB interface on the 

front of this receiver.

See Connecting a USB device on page 34.

5

Loading appears in the GUI screen as this receiver starts 
recognizing the USB device connected. When the display 
shows the USB Top menu you’re ready to play from the 
USB device.

If an Over Current message lights in the display, the 
power requirements of the USB device are too high for 
this receiver. Try following the points below:

• Switch  the  receiver off, then on again.

• Reconnect the USB device with the receiver switched 

off.

• Use a dedicated AC adapter (supplied with the 

device) for USB power.

If this doesn’t remedy the problem, it is likely your USB 
device is incompatible.

1 •  Note  that  characters that cannot be displayed on this receiver are displayed as #.

• This feature is not available for photos on your iPod. To display photos, switch iPod operation to the iPod (see Switching the iPod controls 
below).

2 During Audiobook playback, press 

/ to switch the playback speed: Faster  Normal  Slower

3 You cannot use this function, when an iPod of fifth generation or iPod nano of first generation is connected.
4 •  Compatible USB devices include external magnetic hard drives, portable flash memory drives (particularly key drives) and digital audio 

players (MP3 players) of format FAT16/32.
• Pioneer cannot guarantee compatibility (operation and/or bus power) with all USB mass storage devices and assumes no responsibility for 
any loss of data that may occur when connected to this receiver.

5 Make  sure the receiver is in standby when disconnecting the USB device.
6 The iPod/USB function cannot be selected in the main zone when the Internet radio function is selected in the sub zone. Also, the iPod/USB 

function cannot be selected in the sub zone when the Internet radio function is selected in the main zone.

VSX-33_UXJCB.book  42 ページ  ２０１０年３月９日　火曜日　午前１０時３９分