Multiquip MQ- D206H ユーザーズマニュアル

■ High Temperatures – Always stop engine and allow the

engine to cool before adding fuel, oil or performing service
and maintenance functions. Contact with 

hot components can

cause serious burns.

■ NEVER

 disconnect any 

"emergency or safety devices".

These devices are intended for operator safety. Disconnection
of these devices can cause severe injury, bodily harm or even
death! Disconnection of any of these devices will void all
warranties.

■ NEVER lubricate components or attempt service on a running

machine.

■

ALWAYS 

 allow the machine a proper amount of time to cool

before servicing.

■ Keep the machinery in proper running condition.
■ Fix damage to the machine immediately and always replace

broken parts, or missing decals.

■ Dispose of hazardous waste properly. Examples of potentially

hazardous waste are used motor oil, fuel and fuel filters.

■ DO NOT use food or plastic containers to dispose of

hazardous waste.

■ DO NOT pour waste, oil or fuel directly onto the ground,

down a drain or into any water source.

Emergencies
■

  know the location of the

nearest 

■

  know the location of the nearest

■

In emergencies 

  know the location of the

nearest phone or 

keep a phone on the job site.

Also know the phone numbers of the  nearest
ambulance, doctor and fire department.  This
information will be invaluable in the case of an
emergency.

■ NEVER

  Run engine without air cleaner. Severe engine

damage may occur.

■

ALWAYS  read, understand, and follow procedures in
Operator’s Manual before attempting to operate equipment.

■

ALWAYS be sure the operator is familiar with proper safety
precautions and operation techniques before using pump.

■

ALWAYS  store equipment properly when it is not being used.
Equipment should be stored in a clean, dry location out of the
reach of children.

■

NEVER  leave the pump unattended, turn off engine when
unattended.

■ Unauthorized equipment modifications will void all

warranties.

■ NEVER pump volatile, explosive, flammable or low flash point

fluids. These fluids could ignite or explode.

■ NEVER operate the pump in an explosive atmosphere.
■ Before starting the pump, check that the clean-out cover is

securely fasten.

■ ALWAYS ensure pump is on level ground before use.
■ Become familiar with the components of the pump before

operating.

■ ALWAYS replace any worn  or damaged warning decals.
■ NEVER pump corrosive chemicals or water containing toxic

substances. These fluids could create serious health and
environmental hazards. Contact  local authorities for
assistance.

■ NEVER

 open the priming plug when pump is hot. Hot water

inside could be pressurized much like the radiator of an
automobile. Allow pump to cool to the touch before loosening
plug.

■ NEVER 

open the pump housing during operation or start the

pump with the clean-out cover removed. The rotating impeller
inside the pump can cut or sever objects caught in it.

■ NEVER 

block or restrict flow from discharge hose. Remove

kinks from discharge line before starting pump. Operation
with a blocked discharge line can cause water inside pump
to overheat.

■

ALWAYS fill the pump casing with water before starting the
engine. Failure to maintain water inside the pump housing
will cause severe damage to the pump.

■

In winter drain water from pump housing to prevent freezing.