3D Connexion 7318 ユーザーズマニュアル
10
q
w
e
r
t
y
z
x
c
v
Inserting the bobbin
z
Place the bobbin in the bobbin holder with the
thread running off as illustrated.
thread running off as illustrated.
q
Thread
x
Guide the thread into the front notch on the
front side of the bobbin holder. Draw the
thread to the left, sliding it between the
tension spring blades.
front side of the bobbin holder. Draw the
thread to the left, sliding it between the
tension spring blades.
w
Front notch
e
Tension spring blade
c
Continue to draw the thread lightly until the
thread slips into the side notch.
thread slips into the side notch.
r
Side notch
v
Pull out about 4˝ (10 cm) of thread. Attach the
hook cover plate. Check the threading by
referring to the chart shown on the hook cover
plate.
hook cover plate. Check the threading by
referring to the chart shown on the hook cover
plate.
t
Thread
y
Hook cover plate