3D Connexion 7318 ユーザーズマニュアル
26
!3
!4
b
n
b
Raise and release the foot, and re-attach it
with the left side pin.
Starting just below zipper bottom stop, sew
across fabric to about 3/8˝ (1 cm) distance
from the basting line.
Turn fabric 90 degrees and sew a seam the
entire length of the zipper tape. Before
reaching the slider, stop the machine with
needle in fabric and raise the foot. Use seam
ripper to open a few inches of basting stitch.
with the left side pin.
Starting just below zipper bottom stop, sew
across fabric to about 3/8˝ (1 cm) distance
from the basting line.
Turn fabric 90 degrees and sew a seam the
entire length of the zipper tape. Before
reaching the slider, stop the machine with
needle in fabric and raise the foot. Use seam
ripper to open a few inches of basting stitch.
!3
Unstitch basting
!4
3/8˝ (1 cm)
n
Unzip a few inches to clear a path for
stitching.
At end of seam, sew a few stitches in reverse
to lock. Once both sides of zipper are sewn,
use the seam ripper to open the basting stitch.
stitching.
At end of seam, sew a few stitches in reverse
to lock. Once both sides of zipper are sewn,
use the seam ripper to open the basting stitch.