Polycom 3725-70003-009F ユーザーズマニュアル
Configuring the ReadiVoice System
Proprietary & Confidential
141
Enabling SNMP Logging
The SNMP logging function writes system usage and performance data to log
files on an ongoing basis. For more information about SNMP, logging, and the
files on an ongoing basis. For more information about SNMP, logging, and the
log files, see .
To turn on SNMP logging:
1
As cnow, open .odprocrc for editing.
2
In the [snmpMgr] section of the file, edit the logging parameters as
described in
described in
shows a sample [snmpMgr] section.
3
Save your changes to .odprocrc. Then, as root, stop and restart the
ReadiVoice system (see
ReadiVoice system (see
on page 111) to load the new settings.
Figure 5-6
The SNMP logging settings in .odprocrc
Caution!
Perform the following procedure only after operational hours.
Table 5-8
SNMP logging parameters of the .odprocrc file
Parameter
Value/Description
logPrint
1
Enables SNMP logging.
0
Disables SNMP logging.
logInterval
n
Polling interval, in seconds, at which log file records are
written (minimum interval is 600 seconds).
snmplogfile
filename.log
The full path and name of the SNMP log file (default is
/rahome/bin/snmp/snmp.log).
/rahome/bin/snmp/snmp.log).
histogramlogfile
filename.log
The full path and name of the histogram log file (default is
/rahome/bin/snmp/histogram.log).
/rahome/bin/snmp/histogram.log).
[machines]
...
...
[snmpMgr]
...
logPrint = 1
loginterval = 600
snmplogfile = /rahome/bin/snmp/snmp.log
histogramlogfile = /rahome/bin/snmp/histogram.log
...
logPrint = 1
loginterval = 600
snmplogfile = /rahome/bin/snmp/snmp.log
histogramlogfile = /rahome/bin/snmp/histogram.log
...
[]
...
[]
[]