Acoustic Research AW880 ユーザーズマニュアル
6
Adjusting the Transmitter
2. Set the CHANNEL select switch on the back of
the transmitter to one of the transmitter’s three
broadcast frequencies: 1, 2 or 3. If you experience
poor reception or interference, try choosing a
different frequency by moving the channel select
switch to another position.
broadcast frequencies: 1, 2 or 3. If you experience
poor reception or interference, try choosing a
different frequency by moving the channel select
switch to another position.
Transmitter
power
input jack
Built-in audio
input cable
CHANNEL
select switch
When the transmitter is receiving an audio signal
and is ready, the POWER light on its front turns
steady blue.
steady blue.
Note
If the light on the front of the transmitter keeps
flashing or does not turn on, please check the
following:
If the light on the front of the transmitter keeps
flashing or does not turn on, please check the
following:
- Confirm the transmitter AC power adapter is
securely connected.
- Confirm the cable from the transmitter is
securely connected to the audio source output
(TV, A/V receiver, etc.).
(TV, A/V receiver, etc.).
1. Turn on your audio source (for example, A/V
receiver, TV, stereo, etc.) and play music at a
normal listening volume.
normal listening volume.
Transmitter Front View
Transmitter Back View