Mr. Handsfree Blue XS ユーザーズマニュアル
3
GB
PAIRING THE HEADSET
PAIRING THE HEADSET
You are required to pair the Blue XS headset with your mobile phone once before using it.
Each Blue XS headset has a default PIN-code 0000 for pairing, which is stored in its internal memory. You are usually
required to enter the PIN-code 0000 in a pairing process with a Bluetooth
Each Blue XS headset has a default PIN-code 0000 for pairing, which is stored in its internal memory. You are usually
required to enter the PIN-code 0000 in a pairing process with a Bluetooth
®
mobile phone or other devices; however it
depends on the kind of Bluetooth
®
device that the headset is connected to.
The Blue XS headset must be turned off before initiating pairing.
Press and hold the MF-button (2) until the blue indi-
cator (1) lights up constantly.
The headset is now ready for pairing. Initiate the pairing process on your Bluetooth
®
mobile phone to pair with the Blue XS headset. (Refer to the manual of your mobile phone.)
Select Blue XS out of
the list with found devices on your mobile phone.
You will be asked to enter the PIN-code to complete pairing, enter
0000 and confirm it.
When the pairing has been successful, the blue indicator (1) of the headset will flash every 4
seconds.
Note:
1. If the Blue XS headset is not in pairing mode, your mobile phone won’t find the headset. Please set the headset
1. If the Blue XS headset is not in pairing mode, your mobile phone won’t find the headset. Please set the headset
into pairing mode before letting your mobile phone search for the headset.
2. If no pairing is possible for a period of time (approx. two minutes), the headset will automatically leave pairing
mode. You may need to start all over again.
3. Paired devices remain paired even when:
•
One of the devices is not turned on.
•
A service connection is interrupted or the service stopped.
•
One or both devices are rebooted.
CONNECTION
In some cases the Blue XS can be disconnected from your phone and you will need to restore the connection.
•
•
If the Blue XS has been switched off: Switch on the power and press the MF-button (2) for 1 second.
•
If the mobile phone has been switched off: Turn on the mobile phone and restore the connection via the phone’s
menu.
menu.
•
If one of the two devices has been out of range: Make sure that both devices are within working range and press
the MF-button (2) once.
the MF-button (2) once.
Note:
For all mobile phone types, it is recommended to set “Trust” or “Authorized” for Blue XS in the Bluetooth
For all mobile phone types, it is recommended to set “Trust” or “Authorized” for Blue XS in the Bluetooth
®
menu of your
mobile phone. Please refer to the manual of your mobile phone for more detailed information.
DISCONNECTION
You can disconnect the headset from your phone when, for example, you want to use another Bluetooth
®
device with
your phone. The Blue XS can be disconnected in the following ways:
1. Switch off the headset.
2. Disconnect the headset in the phone’s menu.
3. Move the phone more than 10 meters away from the headset.
1. Switch off the headset.
2. Disconnect the headset in the phone’s menu.
3. Move the phone more than 10 meters away from the headset.
m_BlueXS_GB.indd 3
m_BlueXS_GB.indd 3
19.12.2007 14:53:52
19.12.2007 14:53:52