ONKYO C-1VL ユーザーズマニュアル

 

4

 

• Carefully lift the disc from 

the disc case, making sure 
to hold the disc by its 
edges or the hole in the 
middle.

• You can use a soft, dry 

cloth to wipe dust and finger-
prints off the surface of CDs.
Do not use volatile agents, 
such as thinner or benzene, 
on discs.
Also, do not use conven-
tional record cleaner or anti-
static agents.

 

• Do not place CDs in direct sunlight or in locations 

subject to high humidity or low temperature.

• Do not store a CD in the unit’s disc tray for a long 

period of time.

 

This unit can play the following types of discs.

You cannot play discs other than those listed above.

Avoid using heart-shaped or octagonal discs. Playing 
irregularly-shaped discs may damage the internal mech-
anism of the unit.
Do not use discs that carry a residue from adhesive tape, 
rental discs that have peeling labels, or discs that have 
custom labels or stickers. Otherwise, you may not be 
able to eject the discs, or the unit may become inopera-
tive.

 

Some copy-controlled CDs may not conform to official 
CD standards. They are special discs and may not play 
on the C-1VL.
Do not use discs that are not audio discs (i.e., CD-
ROMs designed for use with personal computers), as 
these could damage the speakers and amplifier.

This unit contains a semiconductor laser system and is 
classified as a “CLASS 1 LASER PRODUCT.” So, to use 
this model properly, read this Instruction Manual care-
fully. In case of any trouble, please contact the store where 
you purchased the unit. To prevent exposure to the laser 
beam, do not try to open the enclosure.

VISIBLE AND INVISIBLE LASER RADIATION 
WHEN OPEN AND INTERLOCK FAILED OR 
DEFEATED. DO NOT STARE INTO BEAM.

THIS PRODUCT UTILIZES A LASER. USE OF CON-
TROLS OR ADJUSTMENTS OR PERFORMANCE OF 
PROCEDURES OTHER THAN THOSE SPECIFIED 
HEREIN MAY RESULT IN HAZARDOUS
RADIATION EXPOSURE.

This label is located on the rear panel. It indicates that:

1. This unit is a CLASS 1 LASER PRODUCT and

employs a laser inside the cabinet.

2. To prevent the laser from being exposed, do not

remove the cover. Refer servicing to qualified
personnel.

Declaration  of  Conformity

We, ONKYO EUROPE

ELECTRONICS GmbH
LIEGNITZERSTRASSE 6, 
82194 GROEBENZELL, 
GERMANY

GROEBENZELL, GERMANY

ONKYO EUROPE ELECTRONICS GmbH

I. MORI

declare in own responsibility, that the ONKYO product 
described in this instruction manual is in compliance with the 
corresponding  technical standards such as EN60065, 
EN55013, EN55020 and EN61000-3-2, -3-3.

 

12 cm

8 cm

(CD single)