Panasonic SC-PM313 ユーザーズマニュアル

RQT7923

You can change the sound effect by selecting Super Sound 
EQ, Preset EQ or adjusting the bass or treble effect.

Provide you with clearer bass and treble effects.

To activate
Press [S.SOUND EQ] to display “S.SOUND EQ” indicator. 

To cancel
Press [S.SOUND EQ] again to clear “S.SOUND EQ” 
indicator.

HEAVY → CLEAR → SOFT → VOCAL → EQ-OFF 

HEAVY

Adds punch to rock

CLEAR

Clarifi es higher frequencies

SOFT

For background music

VOCAL

Adds gloss to vocal

EQ-OFF

No effect

Enable you to enjoy the lower or higher pitch sound.

BASS

For lower pitch sound

TREBLE

For higher pitch sound

∞] or [5] to adjust the level.

The tone level can be varied within -3 to +3.

Enable you to add natural width and depth to the stereo 
sound.

• Surround sound is less discernible when listening through 

headphones.

• If interference in FM stereo reception increases, cancel the 

surround sound effect.

•  Play timer and record timer cannot be used together.
•  The play timer will start at the preset time with volume increasing 

gradually to preset level.

•  The record timer will start 30 seconds before the set time with the 

volume muted.

•  The timer comes on at the set time everyday if the timer is on.
•  The unit must be in the standby mode for the timer to function.
•  If you turn the unit off and on again while a timer is functioning, the 

fi nish time setting will not be activated.

• If AUX is selected as the source, when the timer comes on, the 

system turns on and engages AUX as the source. If you want to 
playback or record from a connected unit, set the other unit’s timer 
to the same time. (See the other unit’s instruction manual.)

Preparation:
•  Make sure that the power supply for all components has 

been turned off before making any connections.

•  For details, refer to the operating instructions of the unit 

which is to be connected.

•  All peripheral components and cables sold separately.

This example shows how to connect an analog player with a 
PHONO OUT/LINE OUT switch.
When units other than those described are to be connected, 
please consult your dealer.

(R)

(L)

“LINE OUT” 

position

Analog player (not included)

Rear panel of this unit

• An analog player with a built-in phono equalizer can be 

connected.

•  Set the switch to the “LINE OUT” position at the back of the analog 

player.

¶/8 REC] to start recording.

PM31_7923-3P.indd   13

PM31_7923-3P.indd   13

2/18/05   3:25:26 PM

2/18/05   3:25:26 PM