Panasonic SC-PM9 ユーザーズマニュアル
9
RQT7360
Listening operations
The radio: preset tuning
There are two methods of presetting stations.
Automatic presetting: Stations the tuner can receive are pre-
Automatic presetting: Stations the tuner can receive are pre-
set automatically.
Manual presetting:
You can select the stations to preset
and the order they are preset in.
and the order they are preset in.
Up to 15 stations each can be set in the FM and AM bands.
Preparation:
Press [TUNER/BAND] to select “FM” or “AM”.
Press [TUNER/BAND] to select “FM” or “AM”.
A Automatic presetting
Do the following once each for FM and AM.
Preparation:
Tune to the frequency where presetting is to begin (
Tune to the frequency where presetting is to begin (
\ page 8).
Press and hold [PROGRAM, –CLEAR].
The tuner presets stations it can receive into the channels in
ascending order. When finished, the last station memorized is
tuned in.
ascending order. When finished, the last station memorized is
tuned in.
B Manual presetting
Preset the stations one at a time.
1
Press [4
4
4
4
4/REW/4] or [3
3
3
3
3/FF/¢] to tune to the
required station.
2
Press [PROGRAM, –CLEAR].
3
Press numeric buttons to select a channel.
The station occupying a channel is erased if another station is
preset in that channel.
preset in that channel.
C Selecting channels
1
Press numeric buttons to select the channel.
For channels 1 to 9 press the corresponding number.
For channels 10 to 15 press [
For channels 10 to 15 press [
h10], then the two digits.
OR
1
Press [PLAY MODE] to select “PRESET”.
2
Press [4
4
4
4
4/REW/4] or [3
3
3
3
3/FF/¢] to select the
channel.
2
Adjust the volume.
AM allocation setting
Each country allocates broadcast bands according to their par-
ticular needs.
This system can also receive AM broadcasts allocated in 10
kHz steps.
ticular needs.
This system can also receive AM broadcasts allocated in 10
kHz steps.
To change the step (9kHz
↔ 10kHz)
Preparation:
1 Press [TUNER/BAND] to select “FM”.
1 Press [TUNER/BAND] to select “FM”.
2 Press and hold [TUNER/BAND].
After a few seconds the display changes to a flashing display
of the current minimum frequency.
of the current minimum frequency.
3 Continue to hold [TUNER/BAND] down.
When the minimum frequency changes, release the button.
To return to the original step, repeat the above steps.
To return to the original step, repeat the above steps.
Note
After changing the “allocation” setting, the frequencies you previously
preset in the memory will be cleared.
preset in the memory will be cleared.
A
TUNER/
BAND
BAND
PROGRAM
– CLEAR
B
3
1
2
1
/REW
/FF
2
PROGRAM
–CLEAR
3
1
2
3
4
5
6
7
8
9
0
10
ABC
DEF
GHI
JKL
MNO
TUV
WXYZ
PQRS
SPACE
C
1
2
1
1
2
3
4
5
6
7
8
9
0
10
ABC
DEF
GHI
JKL
MNO
TUV
WXYZ
PQRS
SPACE
or
PLAY MODE
/REW
/FF
2
VOL
VOL
RQT7360-B_08-12_EN
30/12/03, 2:48 pm
9