Panasonic SC-PM321 ユーザーズマニュアル
RQTV0160
12
Setting the clock
Setting the clock
This is a 12-hour clock.
1
Press [CLOCK/TIMER] to select “CLOCK”.
Each time you press the button:
Each time you press the button:
CLOCK
˚ PLAY
Original display
2
Within 5 seconds, press [ /
4] or [ /¢] to set
the time.
3
Press [CLOCK/TIMER] again to confirm.
Displaying the clock
Press [CLOCK/TIMER] to display the clock for few seconds.
Press [CLOCK/TIMER] to display the clock for few seconds.
Note
The clock may lose or gain minutes over a period of time. Readjust
as necessary.
as necessary.
Using the sleep timer
Using the sleep timer
This function enables you to turn off the unit automatically
after the set time.
after the set time.
Press [SLEEP] repeatedly to select your desired time.
Sleep timer indicator
To cancel
Press [SLEEP] to select “OFF”.
Press [SLEEP] to select “OFF”.
Changing the remaining time
Press [SLEEP] to show the remaining time, and press
[SLEEP] again to select your desired time.
Press [SLEEP] to show the remaining time, and press
[SLEEP] again to select your desired time.
Note
• The play and sleep timer can be used together.
• The sleep timer always has priority. Be sure not to overlap timer settings.
• The sleep timer always has priority. Be sure not to overlap timer settings.
Using the play timer
Using the play timer
You can set the play timer to come on at a certain time to
wake you up.
wake you up.
Preparation
Turn the unit on and set the clock.
Prepare the music source you want to listen to; disc, radio or
music port source, and set the volume.
Turn the unit on and set the clock.
Prepare the music source you want to listen to; disc, radio or
music port source, and set the volume.
1
Press [CLOCK/TIMER] repeatedly to select play
timer.
timer.
CLOCK
˚ PLAY
Original display
2
Within 5 seconds, press [ /
4] or [ /¢] to set the
starting time.
Play timer indicator
Start time
3
4
Press [CLOCK/TIMER] to confirm.
Repeat steps 2 and 3 to set the finishing time.
Finish time
To activate the timer
5
Press [
˚PLAY] to turn on the timer.
“
˚PLAY” is displayed.
6
Press [
y] to turn off the unit.
The unit must be off for the timer to operate.
Other basic operations
Other basic operations
To
Action
change the settings
Repeat steps 1 to 4 and 6.
change the source
or volume
or volume
1) Press [
˚
PLAY] to clear the
˚
PLAY
indicator from the display.
2) Make changes to the source or volume.
3) Perform steps 5 and 6.
3) Perform steps 5 and 6.
check the settings
(when the unit is on
or in standby mode)
(when the unit is on
or in standby mode)
Press [CLOCK/TIMER] repeatedly to select
˚
PLAY.
cancel Press
[
˚PLAY] to clear the timer indicator
from the display.
Note
• The timer will start at the preset time, with the volume increasing
gradually to the preset level.
• The timer comes on at the set time every day if the timer is on.
• The unit must be in the standby mode for the timer to function.
• If you turn the unit off and on again while a timer is functioning, the
• The unit must be in the standby mode for the timer to function.
• If you turn the unit off and on again while a timer is functioning, the
fi nish time setting will not be activated.
• If MUSIC PORT is selected as the source when the timer comes
on, the system turns on and engages MUSIC PORT as the source.
If you wish to playback from the portable audio equipment, activate
the equipment’s play mode and increase the volume. (See the
portable audio equipment’s instruction manual.)
If you wish to playback from the portable audio equipment, activate
the equipment’s play mode and increase the volume. (See the
portable audio equipment’s instruction manual.)
Timer
PM321_P-En.indd 12
PM321_P-En.indd 12
7/13/06 11:42:43 AM
7/13/06 11:42:43 AM