Panasonic WJ-HD716K/G ユーザーズマニュアル
77
Display the operation window
Step 1
Start the web browser.
Step 2
Enter the IP address or URL assigned to the recorder
into the [Address] box, and then press the [Enter] key.
→ The authentication window will be displayed. The
into the [Address] box, and then press the [Enter] key.
→ The authentication window will be displayed. The
authentication window will not be displayed when
"Off" is selected fro "User authentication" on the
[Basic] tab of "User mng." of the setup menu.
"Off" is selected fro "User authentication" on the
[Basic] tab of "User mng." of the setup menu.
Important:
• Refer to a system administrator for further infor-
mation about the set IP address.
• It is impossible to access the recorder from a PC
whose IP address is not registered in the recorder
when "On" is selected for "Host authentication"
on the [Basic] tab of "User mng." of the setup
menu. Refer to a system administrator for further
information.
when "On" is selected for "Host authentication"
on the [Basic] tab of "User mng." of the setup
menu. Refer to a system administrator for further
information.
• Do not attach "0" before the numbers when enter-
ing IP address.
Example: b 192.168.0.50
X
192.168.0.050
• If a message is displayed on the information bar,
see page 127.
Note:
• When displaying the top page of the operation
window of the recorder on a PC for the first time,
the wizard for ActiveX installation required to dis-
play images from cameras will be displayed.
Follow the instructions of the wizard to complete
the installation.
the wizard for ActiveX installation required to dis-
play images from cameras will be displayed.
Follow the instructions of the wizard to complete
the installation.
• When any ActiveX for Panasonic’s digital disk
recorder other than this product is already
installed, uninstall "WebVideo ActiveX" from "Add
or Remove Programs" in "Control Panel" and then
install ActiveX for this product.
installed, uninstall "WebVideo ActiveX" from "Add
or Remove Programs" in "Control Panel" and then
install ActiveX for this product.
• When the installation wizard is displayed each
time displaying other page even though installa-
tion of ActiveX for this product has been complet-
ed, reboot the PC.
tion of ActiveX for this product has been complet-
ed, reboot the PC.
Step 3
Enter the user name and password registered in the
recorder, and then click the [Login] button.
recorder, and then click the [Login] button.
→ The top page will be displayed.
Important:
• Refer to a system administrator for the set user
name and password.
• Refer to the Installation Guide for how to register
users.
• The default administrator name and password are
as follows.
Administrator name: ADMIN
Password: 12345
• To enhance the security, change the administrator
Password: 12345
• To enhance the security, change the administrator
name and password before running the recorder.
Change the password periodically.
Change the password periodically.
Refer to the Installation Guide for how to change
the password.
• Refer to page 127 when a message is displayed
on the information bar or when an unnecessary
status bar or scroll bar is displayed on the pop-up
window.
status bar or scroll bar is displayed on the pop-up
window.
Boot the PC and operate the recorder using a web browser.