Panasonic WJ-HD716K ユーザーズマニュアル
104
Configure the Panasonic alarm protocol settings
[Panasonic alarm protocol]
Select the [Panasonic alarm protocol] tab on the "Network" page. (+ Page 60)
The settings to notify the PC of the event and error information when an event or an error occurs can be configured on this tab.
To display the event and error information, it is necessary that the dedicated software is installed on the PC.
Refer to the "readme.txt" file on the CD-ROM for details about the software.
The settings to notify the PC of the event and error information when an event or an error occurs can be configured on this tab.
To display the event and error information, it is necessary that the dedicated software is installed on the PC.
Refer to the "readme.txt" file on the CD-ROM for details about the software.
[Port number (to PC)]
Enter the addresses of the recipient PCs.
Default: 01818
Enter the addresses of the recipient PCs.
Default: 01818
[Retry]
Set the number of retry attempts for the transmission to the
PC.
0 to 8 (times) (In steps of times)
Default: 2
Set the number of retry attempts for the transmission to the
PC.
0 to 8 (times) (In steps of times)
Default: 2
■
Destination address
[Address1 to Address8]
Enter the addresses of the recipient PCs. Enter the IP
address or host name for "Address 1" - "Address 8".
The host name is available only when selecting "Manual" or
"Auto" for the "Network" page - the [DNS] tab.
Up to 8 destinations can be registered.
Enter up to 255 alphanumeric characters including hyphens
(-) and periods (.).
Enter the addresses of the recipient PCs. Enter the IP
address or host name for "Address 1" - "Address 8".
The host name is available only when selecting "Manual" or
"Auto" for the "Network" page - the [DNS] tab.
Up to 8 destinations can be registered.
Enter up to 255 alphanumeric characters including hyphens
(-) and periods (.).