Panasonic WJ-HD716K ユーザーズマニュアル

114

Setting the detection areas and sensitivity

Step 1

Select the [Setup] button of the [i-VMD setup] tab.

→ The setup page for camera's i-VMD function will be dis-

played.

Note:

• When no operation is made for approx.5 minutes on the

setup page for camera's i-VMD function, the display will
automatically return to Step 1.

Step 2

Select the desired camera.
Select the [Cam.1] tab, and then select the desired camera
(Cam.1/Cam.2...Cam.16) from the pull-down menu.

Step 3

Select the [Area/Sensitivity] tab.
→ The [Area/Sensitivity] tab will be displayed.

Step 4

Set the detection areas and sensitivity for "Motion det." and
"Object det.".
To set "Motion det.", select the [Setup] button on the right
side of "White" and "Blue" of "Motion det." (The detection
areas for "Motion det." are displayed in white or blue frames.
To set "Object det.", select the [Setup] button on the right
side of "Green" and "Red" of "Object det." (The detection
areas for "Object det." are displayed in green or red frames.

Note:

• When checking "All area", all the area on the displayed

image can be set as the detection area.

• When not checking "All areas" and not configuring each

area setting, all the area on the displayed image will be
set as the detection area.