Panasonic WJ-HD716K ユーザーズマニュアル

ページ / 156
119
The version of the recorder and disk information is displayed, and the settings relating to hard disk drives can be configured on 
the "Maintenance" page. It is also possible to initialize the setup data of the setup pages, format SD memory cards, and check 
the system logs on this page. 
The "Maintenance" page has [Product information], [Disk information], [Network information], [Disk], [Settings management] and 
[Logs] tabs. 
Check the product information such as the version [Product informa-
tion]
Select the [Product information] tab of the "Maintenance" page. (+ Page 60)
The version (of the software and hardware) of the recorder, software versions of the extension units connected to the recorder, 
MAC address, and temperature inside the recorder, etc. are displayed on this tab. 
     
Configure the settings relating to maintenance [Maintenance]
Confirm the available hard disk space [Disk information]
Select the [Disk information] tab of the "Maintenance" page. (+ Page 60)
The original capacity, the available capacities of the hard disk drives of the recorder or the extension unit (EXT1-3), and capacities 
of each recording area will be displayed. It is possible to check the time range of the images recorded on the hard disk drives, 
and the operating time of the hard disk drives (hour meter).