Panasonic WJ-HD716K ユーザーズマニュアル

135

Hard disk drives will be locally procured.
When adding an HDD unit, proceed as follows.
It is possible to add an HDD unit without stopping operation.

(+ Page 52)

(+ Page 136)

➜

(+ Page 137)

The hard disk drives can be installed/removed from the HDD slots covered by the front cover.
Contact your dealer for purchasing, installing, and replacing the hard disk drives.

 •  Hard disk drives are precise devices. Handle with care while keeping the following in mind.

•  Do not subject the hard disk drive to any vibration or impact.

•  Before touching the hard disk drive, eliminate static electricity by touching a steel locker, etc. When holding the hard disk

drive, hold the both sides of the hard disk drive.

•  Do not touch the circuit board or the connectors to prevent the hard disk drive from damaging by static electricity.

 •  Contact your dealer for hard disk drives that works on the recorder. Please be forewarned that operation with any hard disk

drive other than the specified models is not guaranteed under any circumstances.

 •  When using multiple hard disk drives, use the same model.
    If different models are used together, even when the capacities of them are the same, the available capacity may be a few 

percent smaller.

 •  Install the hard disk drives one by one in order starting from HDD1.
    (The leftmost slot of the HDD slots is HDD1 and the rightmost one is HDD4.)
 •  Once the operation has started in the RAID 5 or RAID 6 mode, do not change the positions of the HDD units. If they are

changed, it may become impossible to read recorded data.

 
     

When a hard disk drive is 
not formatted

➜

When a hard disk drive is 
formatted

➜

When recording on the newly 
installed hard disk drive

➜

➜

➜