Panasonic WJ-HD716K ユーザーズマニュアル
139
Step 1
Hold down the [USE] button for 2 seconds or more.
→ The buzzer will start sounding. The HDD Configuration
→ The buzzer will start sounding. The HDD Configuration
menu will be displayed on Monitor 2.
Step 2
Move the cursor onto "Execute>" of "Remove HDD unit".
→ The "Remove HDD unit" window will be displayed.
→ The "Remove HDD unit" window will be displayed.
Step 3
Select the extension unit to shut down, and select the [OK]
button.
Extension unit: Ext.x (x: unit number)
button.
Extension unit: Ext.x (x: unit number)
→ When the shutdown process is complete, the HDD indi-
cator (STS (status)) on the front panel will go off.
Note:
• When the shutdown process of the extension unit on
which recording is being performed starts, recording will
continue on another HDD unit. Images may sometimes
not be recorded for several seconds when switching the
HDD unit for recording. If there is no recordable HDD
unit in the recorder, recording will stop.
continue on another HDD unit. Images may sometimes
not be recorded for several seconds when switching the
HDD unit for recording. If there is no recordable HDD
unit in the recorder, recording will stop.
Shutdown process of the extension unit
It is also necessary to start the shutdown process of the extension unit to remove the extension unit from the system.
It is possible to shut down all the hard disk drives in the extension unit by operating as follows.
The shutdown process can be started from the HDD operation change menu.
Before the following procedure, detach the front cover from the recorder. (+ Page 21)
It is possible to shut down all the hard disk drives in the extension unit by operating as follows.
The shutdown process can be started from the HDD operation change menu.
Before the following procedure, detach the front cover from the recorder. (+ Page 21)