Panasonic WJ-HD716K ユーザーズマニュアル

16

■

 q  Status indicator

ERROR: Blinks when an error that can become a prob-

lem for the recorder to run the system occurs.
Blinks red: System error
Blinks orange: Thermal error, cooling fan malfunc-

tion, etc.

ALARM: Blinks when an alarm occurs, and lights when 

the alarm output stops. The blinking or lighting indi-
cator will go off when the alarm reset button is 
pressed.

ALARM SUSPEND: Lights when the alarm suspension 

mode is selected. (+ Operating Instructions (PDF))

TIMER: Lights when the schedule recording is set, and 

blinks while the schedule recording is being per-
formed.

OPERATE: Lights when the power is on.

 w  Alarm reset button [ALARM RESET]
    Press this button to reset the alarm.

 e  Camera selection button
    Press the desired camera selection button to display 

images from the respective camera. The camera selec-
tion button also indicates the status of the camera as 
follows.

Lights green: Indicates the camera channel from 

which images are currently being displayed on 
the monitor.

Lights orange: Indicates the camera channel from 

which images are being recorded.

     

 r  Recording/Playback operation button

[■ STOP] button: Press this button to stop playback.
[

B PLAY h PAUSE] button: Press this button to start 

playback.

 

  Playback will be paused by pressing this button dur-

ing playback.
Lights green: During playback 
Blinks green: During pause

[● REC] button: Starts manual recording

 

  Recording will be stopped by holding down this but-

ton (for more than 2 seconds) during manual record-
ing.
Lights orange: During recording

 t  Jog dial (inside)/Shuttle ring (outside)
    Jog dial: The following functions are provided.
    Frame by frame playback can be performed during 

pausing.

    Skip can be performed during playback.
    Shuttle ring: The following functions are provided.
    Fast forward/reverse playback can be performed during 

playback.

 y  Hold button [HOLD]
    Press this button during fast forward/reverse playback 

started by the shuttle ring to hold the current playback 
speed (hold playback speed function).
Blinks green: During hold playback

    In addition, press this button to perform panning/tilting 

operation of cameras.
Lights green: During low-speed panning/tilting control

     

u

ESC

SET

MOUSE

MAINTENANCE

STS A/F

STS A/F

STS A/F

STS A/F

SDHC/SD memory 

card slot

VIDEO OUT

AUDIO OUT

q

i

o

!1

!2

!3

!0

w

e

r

t

y

!5

!4