Panasonic WJ-HD716K ユーザーズマニュアル

59

 !1  [Maintenance] button
    Select this button to display the "Maintenance" page (+ 

page 119). 

    Check and setup of the hard disk drive information of 

the recorder, management of the setup data and check 
of log information can be carried out on the 
"Maintenance" page. Formatting SD memory cards and 
displaying the disk configuration page can also be car-
ried out on the "Maintenance" page. 

     

 !2  [Exit] button
    Exits the setup menu when finishing the operation of 

setup menu. The settings will be applied. 

 !33  Setup page
    Displays each setup page. There are tabs for some 

setup pages. 

     

The settings required to operate the recorder are configured on the setup menu in advance. 
The setup menu is displayed on Monitor 2. 

 •  The setup menu can also be displayed by holding down the [SETUP/ESC] button (for more than 2 seconds) on the front

panel of the recorder.

 •  At the startup of the setup menu for the first time, "Quick" page will be displayed as the top page of the setup menu.
    After operating the recorder on the "Quick" page or each setup page, the "Basic" page (+ page 65) will be displayed as the 

top page of the setup menu from the next time.

     

Display the setup menu. 
Display the sub menu by pressing the [SUB 
MENU] button, move the cursor to "Setup 
Menu", and press the [SET] button. 

→  The setup menu window opens.

 •  While live images are being displayed, hold down the

[SETUP/ESC] button for more than 2 seconds.

     

Display the setup menu. 
Click "S.Menu" on the status bar below the screen, and click 
"Setup Menu" on the "Sub Menu" window. 
     

➜