Samsung EV-1S ユーザーズマニュアル

15 FM stations 

15 MW stations     

7 LW stations

Switch the system on by pressing On/Standby ( 

).

Select the required frequency band by pressing Band on the
remote control.
Result: The appropriate indication is displayed:

Frequency Modulation

Medium Wave

Long Wave

Manually

One or more times until 

is

displayed.

Automatically

One or more times until 

is

displayed.

PRESET function is explained in detail in the section
“Selecting a Stored Station” on.

Select the station to be stored by:

Pressing 

or 

buttons to increase or decrease the

frequency respectively.

To scroll through the frequencies faster when 
searching manually, hold down the

or 

buttons.

The automatic search procedure may stop on a 
frequency that does not correspond to a radio station.
If this happens, use the manual search mode.

If you do not want to store the radio station found, revert to Step 4
and search for another station.

Otherwise:

a Press Program/Set.

Result:

is displayed for a few seconds. 

b Press Program/Set to store the radio station.

Result:

is no longer displayed and the station is

stored.

To store any other radio frequencies required, repeat Steps 3 to 5.

The PROGRAM function can be used to assign a new station
to an existing program number.

Rotating the FM or AM(MW) aerial

If reception from a specific FM radio station is poor, press Mono/ST.
to switch from stereo mode to mono. The quality of the sound will be
improved.

Switch the system on by pressing On/Standby (         ) .

Select the required frequency band by pressing Band on the 
remote control.

Select the radio station as follows.

Stored station

1. Press the Mode button on the remote

control until “

” is displayed.

2. Press

or

button to select the

required program.

Mono/ST

Mute

VOL. 

Band

VOL. 

Mode

Program/

Set

Mono/ST

Mute

VOL. 

Band

VOL. 

Mode

Program/

Set

Mono/ST

Mute

VOL. 

Band

VOL. 

Mode

Program/

Set

Mode

Mode

EV-1(GB)-RDS  12/17/02  16:17  Page 15