Sharp BD-HP20U ユーザーズマニュアル

You will enjoy high quality digital picture and sound through the HDMI terminal.
When you use AQUOS LINK, make sure to use a certifi ed HDMI cable.

• Load a disc and start playback. (Pages 24-27)
• If desired, connect audio equipment. (Pages 17-19)
• Refer to AQUOS LINK function. (See page 23 and 40)

HDMI cable 

(commercially available)

1 and 2).

1

To HDMI OUT terminal

2

To HDMI input terminal

When you connect both an HDMI cable and a component 
cable to this player, switch to the output terminals by remote 
control. 
(The video output is not output both terminals.)

•  When you connect this player to a SHARP TV with an HDMI cable 

only and if the TV is on, the video output is changed to HDMI 
output automatically. 

  The following setting is unnecessary.
•  When you connect to the TV with an HDMI cable only, HDMI video 

output is set to AUTO. If you don’t get the normal image, select 
the desired resolution.

•  When you are setting HDMI video output besides AUTO, you can 

only select the resolution that corresponds to the connected TV.

Caution:
•  HDMI output and Component Video output 

can not be used at the same time.

Turn on the power.

Press HDMI button for 5 seconds, and the 
change of “Component Video Out” and “HDMI 
Out” is possible.
•  (To switch outputs, it is necessary to keep the button 

pressed for several seconds.)

  Also, when the HDMI button is pressed, the current 

setting conditions will display while fl ashing (blinking), 
and then the selected output lamp displays.

“

” or “

” is displayed 

alternately on the front panel display.

Caution:
•  Even when there is no cable connected to the Component video out, 

switching the output to CP-out (Component video out) is still possible.

  When CP-out is selected, there will be no signal from the HDMI 

video out.

•  When using an HDMI output, 7.1 ch 

Digital Output is available.

BD-HP20U_en_c.indd   14

BD-HP20U_en_c.indd   14

2007/10/03   13:01:12

2007/10/03   13:01:12